Specifications

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Configuring Routing Between VLANs

First Published: March 15, 2006

Last Updated: October 10, 2008

This module provides an overview of VLANs. It describes the encapsulation protocols used for routing

between VLANs and provides some basic information about designing VLANs. This module contains

tasks for configuring routing between VLANS.

Finding Feature Information in This Module

Your Cisco IOS software release may not support all of the features documented in this module. To reach

links to specific feature documentation in this module and to see a list of the releases in which each feature is

supported, use the “Feature Information for Routing Between VLANs” section on page 71.

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image

support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on

Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at

the login dialog box and follow the instructions that appear.

Contents

• Information About Routing Between VLANs, page 2

• How to Configure Routing Between VLANS, page 12

• Configuration Examples for Configuring Routing Between VLANs, page 52

• Additional References, page 70

• Feature Information for Routing Between VLANs, page 71