Specifications

Configuring IPX Multilayer Switching
IPX MLS Configuration Examples
10
MLS-RP Configuration
This example shows how to configure the MLS-RP:
mls rp ipx
interface fastethernet 2/0
full-duplex
mls rp vtp-domain Engineering
interface fastethernet2/0.1
encapsulation isl 1
ipx address 10.1.1.1 255.255.255.0
mls rp ipx
mls rp management-interface
interface fastethernet2/0.10
encapsulation isl 10
ipx network 10
mls rp ipx
interface fastethernet2/0.20
encapsulation isl 20
ipx network 20
mls rp ipx
interface fastethernet2/0.30
encapsulation isl 30
ipx network 30
mls rp ipx
This example shows how to configure the RSM VLAN interfaces with no access lists. Therefore, the
flow mask mode is destination.
Building configuration...
Current configuration:
!
version 12.0
.
.
.
ipx routing 0010.0738.2917
mls rp ip
mls rp ipx
.
.
.
interface Vlan21
ip address 10.5.5.155 255.255.255.0
ipx network 2121
mls rp vtp-domain Engineering
mls rp management-interface
mls rp ip
mls rp ipx
!
interface Vlan22
ip address 10.2.2.155 255.255.255.0
ipx network 2222
mls rp vtp-domain Engineering
mls rp ip
mls rp ipx
!
.
.
.
end
Router# show run