Specifications

Configuring IPX Multilayer Switching
IPX MLS Configuration Examples
9
SwitchA> (enable) set mls enable ipx
IPX Multilayer switching is enabled.
SwitchA> (enable) set mls include ipx 10.1.1.1
IPX Multilayer switching enabled for router 10.1.1.1.
SwitchA> (enable) set port name 3/1 Destination D2
Port 3/1 name set.
SwitchA> (enable) set vlan 20 3/1
VLAN 20 modified.
VLAN 1 modified.
VLAN Mod/Ports
---- -----------------------
20 3/1
SwitchA> (enable)
Switch B Configuration
This example shows how to configure Switch B:
SwitchB> (enable) set port name 1/1 SwitchA Link
Port 1/1 name set.
SwitchB> (enable) set port name 3/1 Source S1
Port 3/1 name set.
SwitchB> (enable) set vlan 10 3/1
VLAN 10 modified.
VLAN 1 modified.
VLAN Mod/Ports
---- -----------------------
10 3/1
SwitchB> (enable)
Switch C Configuration
This example shows how to configure Switch C:
SwitchC> (enable) set port name 1/1 SwitchA Link
Port 1/1 name set.
SwitchC> (enable) set port name 3/1 Destination D1
Port 3/1 name set.
SwitchC> (enable) set vlan 30 3/1
VLAN 30 modified.
VLAN 1 modified.
VLAN Mod/Ports
---- -----------------------
30 3/1
SwitchC> (enable) set port name 4/1 Source S2
Port 4/1 name set.
SwitchC> (enable) set vlan 30 4/1
VLAN 30 modified.
VLAN 1 modified.
VLAN Mod/Ports
---- -----------------------
30 3/1
4/1
SwitchC> (enable)