Specifications

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Configuration Examples for EtherSwitch HWICs
111
Router# show mac-address-table multicast igmp-snooping
HWIC Slot: 1
--------------
MACADDR VLANID INTERFACES
0100.5e05.0505 1 Fa0/1/1
0100.5e06.0606 2
HWIC Slot: 3
--------------
MACADDR VLANID INTERFACES
0100.5e05.0505 1 Fa0/3/4
0100.5e06.0606 2 Fa0/3/0
Router#
The following is an example of output from the show running interface privileged EXEC command
for VLAN 1:
Router# show running interface vlan 1
Building configuration...
Current configuration :82 bytes
!
interface Vlan1
ip address 192.168.4.90 255.255.255.0
ip pim sparse-mode
end
Router# show running interface vlan 2
Building configuration...
Current configuration :82 bytes
!
interface Vlan2
ip address 192.168.5.90 255.255.255.0
ip pim sparse-mode
end
Router#
Router# show ip igmp group
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
209.165.200.225 Vlan1 01:06:40 00:02:20 192.168.41.101
209.165.200.226 Vlan2 01:07:50 00:02:17 192.168.5.90
209.165.200.227 Vlan1 01:06:37 00:02:25 192.168.41.100
209.165.200.228 Vlan2 01:07:40 00:02:21 192.168.31.100
209.165.200.229 Vlan1 01:06:36 00:02:22 192.168.41.101
209.165.200.230 Vlan2 01:06:39 00:02:20 192.168.31.101
Router#
Router# show ip mroute
IP Multicast Routing Table
Flags:D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C -
Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,