User guide

64 Implementing Cisco InfiniBand on IBM BladeCenter
4. Click Next to continue driver installation. When the driver instillation is complete, you see
the bridge module under System Devices in device manager as shown in Figure 4-44.
Figure 4-44 Bridge in System Devices
5. Windows now finds the SilverStorm Technologies VEx I/O Controller. Select Install from
a specific location and click Next.
6. Click Browse under Include this location in the search. Select the following location
and click OK.
C:\Program Files\SilverStorm\SilverStorm HCA\net
7. Click Next to continue driver installation. The wizard finds and installs the Ethernet over
InfiniBand Virtual NIC.
8. Repeat steps 5 through 7 for the other VNIC adapters. There is a total of six adapters.
When the driver instillation is complete, you see six Virtual NICs under Network Adapters
in the Device Manager as shown in Figure 4-45.
Figure 4-45 Virtual NICs in Device Manager