User guide

54 Implementing Cisco InfiniBand on IBM BladeCenter
8. Each Fibre Channel port on the bridge module has a port world wide name (WWN). On
the storage device, the bridge port WWN needs to be mapped to the drives. A Fibre
Channel connection has to be established between the bridge port and the storage device
for the storage device to see the bridge port WWN.
Figure 4-24 Bridge Port information
Figure 4-25 Bridge Port WWN on IBM FAStT DS4300
9. When the bridge port to remote drive mapping has been established, another mapping
from SRP initiator to remote drive needs to be established. On the bridge Web GUI main
menu, click FCP Device Discovery, then Start. The remote drives that are mapped to the
bridge ports display in Discovered Devices, as shown in Figure 4-26.
Figure 4-26 Discovered Fibre Channel Storage