User guide

Chapter 4. Configuring InfiniBand with QLogic bridges 43
Figure 4-3 InfiniServ driver install menu
6. Follow the driver installation prompts and accept the defaults as shown in Figure 4-4 on
page 44.
SilverStorm Technologies Inc. IBM Install (4.1.0.6.3 release) Menu
Please Select Install Actin:
0) IB Network Stack [ Install ] [Available]
1) IB Development [ Install ] [Available]
2) IB Boot [Do Not Install] [Not Avail]
3) Fast Fabric [Do Not Install] [Not Avail]
4) Virtual HBA (SRP) [ Install ] [Available]
5) Virtual NIC [ Install ] [Available]
6) IP over IB [ Install ] [Available]
7) MPI Runtime [Do Not Install] [Not Avail]
8) MPI Development [Do Not Install] [Not Avail]
9) MPI Source [Do Not Install] [Not Avail]
a) uDAPL [ Install ] [Available]
b) SDP [ Install ] [Available]
c) RDS [ Install ] [Available]
P) Perform the selected actions
I) Install All
U) Uninstall All
X) Return to Previous Menu (or ESC)
Note: Do not put the SilverStorm firmware on the Cisco HCA. If you install the
SilverStorm firmware, the HCA will no longer respond to the operating system.