User guide

Chapter 7. Configuring the Cisco 3012 InfiniBand to Ethernet gateway 151
5. After BG1 and BG 2 have been created, close the Bridging window and from the main
window of the Element Manager, click Ethernet → Redundancy. This opens a window
similar to Figure 7-26.
Figure 7-26 Redundancy Groups window before a Redundancy groups has been created
6. Click Add in the Redundancy Groups window to begin creating the Redundancy Group.
This will open the Add Redundancy Group window, Figure 7-27. Select the ID (default is
1). Give the group a name (RG1 in this example). Click Add Members, and select the two
bridge groups that had previously been created for this example. The end result should
like Figure 7-27.
Figure 7-27 Redundancy Group filled out, ready to be created