User guide

Chapter 6. Boot from InfiniBand using the Cisco 3012 InfiniBand to FC gateway 113
3. Upon power on or restart, the service initializes into the Boot over InfiniBand firmware
menu shown in Figure 6-23. Ensure that option
2 “Well Known boot service” (the default
value) is selected. Then select option s to save the configuration and select x to exit the
InfiniBand firmware menu.
Figure 6-23 InfiniBand HCA Firmware menu
InfiniBand boot driver v3.2.0 build 106
(c)Copyright Topspin Communications, Inc. 2003-2005
Type 'x' to configure boot options
Node GUID: 0005ad0000050724
Waiting for SM to configure ports............................x...........
............................................
[ 0] PXE Boot
Port LID IOC Service Name
[ 1] * - - 201500a0b8261210 [saved service]
[ 2] * * * 20000005ad00ffff [Well known boot service]
ERROR: Bad service name format
[ 3] 1 40 1 201500a0b8261210
[ 4] 1 39 1 201500a0b8261210
[e(x)it, (o)ptions, (s)ave, (r)estore, re(f)resh, (d)efault, d(i)sable]
Select [ 2] s
Please wait while boot configuration data is being saved.
[ 0] PXE Boot
Port LID IOC Service Name
[ 1] * - - 201500a0b8261210 [saved service]
[ 2] * * * 20000005ad00ffff [Well known boot service]
ERROR: Bad service name format
[ 3] 1 40 1 201500a0b8261210
[ 4] 1 39 1 201500a0b8261210
[e(x)it, (o)ptions, (s)ave, (r)estore, re(f)resh, (d)efault, d(i)sable]
Select [4]: x
Connected to: 0x201500a0b8261210 at port: 1 lid 0x0027, ioc: 1
Vendor: IBM
Model : 1814 FAStT
Drive C redirected to the SRP target