Installation guide

2-39
Cisco IGX 8400 Series Installation Guide, Release 9.3.3 and Later Releases
OL-1165-06
Chapter 2 Preparing to Install
Making Power and Ground Connections
Figure 2-21 IGX 8410 Frame Bonding Connections
AC Power Connections
Cisco provides at least one, 8-ft (3-m) power cord with each AC power supply assembly. To make AC
power connections to the IGX:
Step 1 Make sure that all AC and system power circuit breakers are in the OFF position.
Step 2 Make sure that the AC plug wiring has the correct relationship. Figure 2-22 shows the voltage across the
wires in an IGX 8410 plug. Figure 2-25 shows the voltage across the wires in an IGX 8420 or IGX 8430
plug.
Frame bonding
connection
PE-BC
H8387