Installation guide

2-15
Cisco IGX 8400 Series Installation Guide, Release 9.3.3 and Later Releases
OL-1165-06
Chapter 2 Preparing to Install
IGX 8410 Enclosure Installation
Figure 2-3 IGX 8410 Rack-Mounting Dimensions
Step 2
At the front of the rack, attach the temporary spacer bracket and temporary mounting brackets so that
the uppermost portion of these pieces are at the bottom of the intended location of the IGX 8410 node.
Figure 2-4 shows a temporary spacer and mounting bracket in a cabinet supplied by Cisco.
Caution If you must move a Cisco cabinet to install an IGX switch, do not push the cabinet at its sides. Instead,
grip the cabinet at the front or back edges to maneuver it to the setup location.
19 in.
(48.3 cm)
24.44 in.
(62.1 cm)
17.72 in.
(45 cm)
26.3 in.
(67 cm)
H8382