Installation guide

2-12
Cisco IGX 8400 Series Installation Guide, Release 9.3.3 and Later Releases
OL-1165-06
Chapter 2 Preparing to Install
Seismic Anchoring for the Cisco Rack
Figure 2-1 Stability Plate Dimensions
Step 2 Remove the stability plate from the base of the Cisco cabinet. Save the nuts and bolts.
Step 3 With the user-provided anchoring bolts, attach the stability plate to the floor.
Step 4 Roll the Cisco cabinet over the stability plate, as Figure 2-2 illustrates.
Step 5 Using the nuts and bolts from the shipping setup, secure the Cisco cabinet to the stability plate.
H8380
C
L
3.35 in.,
8.51 cm
6.7 in.,
17.02 cm
3.35 in.,
8.51 cm
Cabinet
outline
9.5 in.,
24.13 cm
0.663 in., 1.68 cm
0.337 in., 0.85 cm
11.55 in.,
29.34 cm
18.0 in.,
45.72 cm
33.875 in.,
86.04 cm
34.550 in., 87.76 cm
18.0 in.,
45.72 cm