Installation guide

2-4
Cisco IGX 8400 Series Installation Guide, Release 9.3.3 and Later Releases
OL-1165-06
Chapter 2 Preparing to Install
Parts Checklist
IGX 8410 Enclosure
Check the cabinet for the following inventory:
• For rack-mount systems, four permanent mounting brackets are present. Also, for installation
purposes only, a pair of temporary mounting brackets and a temporary spacer bracket are present.
• The unit has the correct power type (AC or DC) and the factory-installed power-entry back card
(PE-BC). For DC-powered systems, DC power entry modules (PEMs) are installed in the PE-BC.
For AC systems, check for the power supply tray, correct power cord, and correct number of
supplies.
IGX 8420/8430 Enclosures
Check the cabinet for the following inventory:
• The unit has the correct number of card cages (1 or 2).
• The unit has the correct power type (AC or DC) and the factory-installed power-entry back cards
(PE-BC), one per shelf. For DC-powered systems, DC PEMs are factory-installed in each PE-BC.
For an AC system, check for the power supply tray and correct number of power supplies and cables.
Plug-In Cards
Make sure that all purchased cards are present. Check the number and type of cards shipped against the
number and type of card purchased. In Table 2-3, the column on the left lists the front cards. The column
on the right lists the possible corresponding back cards. Check off each card type as you inventory them.
An inventory list of the installed cards is shipped with the unit. The list includes each card's serial
number, revision number, and slot number (serial and revision numbers are also found on the solder side
of each card). Check for the presence of any other items on the shipping list. After verifying that the
correct cards are present, tape a copy of the inventory list to the cabinet door or tape into your network
documentation.
Table 2-3 Inventory Checklist
Front Card Checklist Back Card Checklist
Correct number and types of NPMs One SCM
Correct number of NTMs Correct number of BC-T1s
Correct number of BC-E1s
Correct number of BC-Y1s
Correct number of BC-SRs