Installation guide
CHAPTER
2-1
Cisco IGX 8400 Series Installation Guide, Release 9.3.3 and Later Releases
OL-1165-06
2
Preparing to Install
Power Worksheets
Tip An interactive version of these worksheets also is available at
http://www-tac.cisco.com/Support_Library/Hardware/WAN_Switches_and_Modules/IGX_8400/
IGXPowerBudgetWorksheet.html.
Before you install the system, verify that you have adequate power for all cards to be installed in the
chassis. Using Table 2-1 and Table 2-2, follow the instructions listed below, or use the interactive
version, to calculate your power budget for each node to be installed in the network.
Table 2-1 Cisco IGX 8400 Series Power Consumption Worksheet
Line IGX Card Card Power Quantity Total Power
1 ALM, all back cards 51 W ____ ____
2 ARM, all back cards 9 W ____ ____
3 BTM, all back cards 56 W ____ ____
4 CVM, all back cards 44 W ____ ____
5 FRM-B, all back cards 50 W ____ ____
6 FRM, all back cards 55 W ____ ____
7 FTM, all back cards 43 W ____ ____
8 HDM, all back cards 51 W ____ ____
9 LDM, all back cards 34 W ____ ____
10 NPM, SCM back card 43 W ____ ____
11 NTM, all back cards 37 W ____ ____
12 UFM-C, all back cards 66 W ____ ____
13 UFM-U, HSSI back card 93 W ____ ____
14 UFM-U, all minus HSSI 72 W ____ ____
15 URM, all back cards 73 W ____ ____
16 UVM, all back cards 55 W ____ ____
17 UXM, all back cards 73 W ____ ____