Installation guide

A-25
Cisco IGX 8400 Series Installation Guide, Release 9.3.3 and Later Releases
OL-1165-06
Appendix A System Specifications
Printer
Connect the modem to the IGX AUX port using the cable shown in Figure A-1. Ask the Cisco TAC to
assist in the modem testing (see the “Obtaining Technical Assistance” section on page xxiii).
Modem Cables
The IGX Auto-Dial to Cisco application (also called “call home”) and IGX Auto-Answer (call from
Cisco) application use different modem cables. Figure A-1 shows the modem cable pinout for
IGX Auto-Dial to Cisco TAC. Figure A-2 shows the modem cable pinout for IGX Auto-Answer (call
from Cisco TAC).
Figure A-1 Pinout for Customer to Auto-Dial Cisco (Call Home)
Figure A-2 Cable Pinout for Auto-Answer by Customer’s Modem
10 AT&V Verifies entries.
11 AT&W Saves current settings to nonvolatile memory.
Table A-8 Steps for Attaching a Terminal to the Autodial Modem (continued)
Step Command Function
H8378
1
2
3
6
20
1
77
2
3
8
20
H8377
1
7
8
2
3
4
5
6
20
1
7
8
2
3
4
5
6
20