Installation guide

xix
Cisco IGX 8400 Series Installation Guide, Release 9.3.3 and Later Releases
OL-1165-06
Preface
Related Documentation
Cisco IOS Software Documentation
Note Cisco IOS software is available only on the Universal Routing Module (URM) front card. Unless you
intend to configure the IGX for IP services using the URM, you do not need to refer to
Cisco IOS documentation.
Cisco IOS software documentation provides information on using the Cisco IOS software required by
the IGX for IP services.
Note Cisco IOS documentation is organized by Cisco IOS release, then by product type and name.
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
Main Cisco IOS Software Documentation Pages by Release
The main Cisco IOS software documentation pages provide links to all software documentation
available for the release. Cisco IOS software documentation is classified as outlined in the following
sections.
You can access the main Cisco IOS software documentation pages at Cisco Product Documentation >
Cisco IOS Software > Cisco IOS Software Release you are using.
Or use the following links:
• Cisco IOS Release 12.1
• Cisco IOS Release 12.2
Master Index to Software Documentation
The Cisco IOS software documentation provides detailed configuration procedures and examples.
You can access these documents at Cisco Product Documentation > Cisco IOS Software > Cisco IOS
Software Release you are using > Cisco IOS Release x.x Master Index> Configuration guide or
command reference indexes.
Or use the following links:
• Cisco IOS Release 12.1 Master Indexes
• Cisco IOS Release 12.2 Master Indexes
Configuration Guides
The Cisco IOS software configuration guides provide detailed configuration procedures and examples.
You can access these documents at Cisco Product Documentation > Cisco IOS Software > Cisco IOS
Software Release you are using > Configuration Guides and Command References > Configuration
guide for your application.