Installation guide

A-1
Cisco IGX 8400 Series Installation Guide, Release 9.3.3 and Later Releases
OL-1165-06
APPENDIX A
System Specifications
This appendix contains system specifications for all models and communications types for the node.
General IGX 8410 Switch Specifications
This section provides general system information on the IGX 8410 node.
System capacity: 1 shelf with 8 card slots.
Slots 1 and 2 are dedicated to NPM front cards and the SCM back
card.
Up to 32 trunks (physical or virtual).
Up to 48 lines (any T1, IMA NxT1, E1, IMA NxE1, T3, E3, or
OC3/STM1 interfaces that are not trunks).
Enclosure size: IGX 8410 Standalone/Rack-mount:
Height: 25 in. (63.5 cm) standalone; 24.5 in. (62.3 cm), rack
Width: 19.9 in. (50.5 cm), standalone; 19 in. (48.3 cm), rack
Depth: 26.5 in. (67.3 cm), standalone and rack-mount
Shipping weight: 270 lb (122.7 kg)
Clearance requirement: Min. clearance: 30 in. front; nominal 30 in. rear; 12 in. side
Power input voltage: AC system: Normal operating range is 100–240 VAC, 47 to 63 Hz.
The (under- and over-voltage limits are 90–254 VAC).
DC system: –42 to –56 VDC.
Each AC supply can provide up to 400W to the card shelves.
Space is available for four power supplies.
Input AC power
connector:
IEC 16 A input connector: Six different power cords are available
to comply with the standards of individual countries. Power cords
are 6 ft (about 2 meters) long. See the “Cabling Summary” section
on page A-26 for details.