Specifications

A-5
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Appendix A Cisco IGX 8400 Series Feeder Nodes
See Also
BPX Routing Node
If the routing node is a BPX, refer to the chapter “Configuring Trunks and Adding Interface Shelves” of
the Cisco BPX 8600 Series Installation and Configuration.
On Cisco.com:
Products & Services: Switches: Cisco BPX 8600 Series Switches: Instructions and Guides:
Installation Guides Books: Installation and Configuration
On the Documentation CD-ROM:
Cisco Product Documentation: WAN Switches: BPX 8600 Series: Release 9.3.3:
Installation and Configuration Guide
MGX Routing Node
Note Not all MGX platforms support the IGX feeder node. Refer to the MGX release notes and platform
documentation to verify support for the IGX feeder node.
If the routing node is an MGX, refer to the following sections in the chapter “AXSM Configuration
Guide” of the AXSM Software Configuration Guide and Command Reference, Release 4:
• Cisco IGX Feeder to Cisco MGX 8850 Configuration Procedure
• Cisco IGX Feeder Removal Procedure
See Also
Cisco WAN Switching System Overview, Release 9.1
Part 2 - NETWORKS: Tiered Networks
Understanding and Enabling Software Functions (cnfswfunc) on BPX/IGX Switches
(TAC Tech Note)
Cisco WAN Manager Documentation
On Cisco.com:
Products & Services: Network Management: Cisco WAN Manager
On the Documentation CD-ROM:
Cisco Product Documentation: Network Management: Cisco WAN Manager
Cisco WAN Switching Software Release Notes
On Cisco.com:
Products & Services: WAN Switching Software and Firmware: platform Software: Instructions and
Guides: Release Notes
On the Documentation CD-ROM:
Cisco Product Documentation: WAN Switches: platform: software-release