Specifications

10-69
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Chapter 10 Cisco IGX 8400 Series IP Service
Where to Go Next
Trunk and port counter statistics (cell discard statistics only) for the following Qbins can be collected
by SNMP:
• Qbins 1 through 15 for UXM trunks
• Qbins 2, 3, and 7 through 15 for UXM ports
Qbin summary and counter statistics are automatically collected and TFTP and USER interval statistics
can be enabled. The cell discard statistics on UXM trunk Qbins 1 through 9 are AUTO statistics. The
cell discard statistics on Qbins 10 through 15 and AutoRoute port Qbins are not AUTO statistics.
Interval statistics (per Qbin) are collected through Cisco WAN Manager’s Statistics Collection Manager
(SCM) and through CLI.
Summary of Qbin Statistics Commands
Where to Go Next
For more information on MPLS on the IGX, refer to MPLS Label Switch Controller and Enhancements
12.2(8)T.
For more information on Cisco IOS configuration and commands, refer to documentation supporting
Cisco IOS Release 12.2T or later (see the “Cisco IOS Software Documentation” section on page ix).
For more information on switch software commands, refer to the Cisco WAN Switching Command
Reference, Chapter 1, “Command Line Fundamentals.”
For installation and basic configuration information, see the Cisco IGX 8400 Series Installation Guide,
Chapter 1, “Cisco IGX 8400 Series Product Overview.”
Table 10-15 Commands for Collecting and Viewing Qbin Interval, Summary, and Counter Statistics
Command Description
clrportstats Resets or clears the summary statistics of all statistics types on a specified
port.
clrtrkstats Resets or clears the summary statistics of all statistic types on a specified
trunk.
cnfportstats Collects USER statistics of one statistics type on a specified port.
cnfstatparms Enables TFTP statistics from the CLI (the equivalent of using the SCM).
cnftrkstats Collects USER statistics of one statistic type on a specific specified trunk.
dspcntrstats Views all counter statistics of a specified entity in real-time. These statistics
cannot be cleared.
dspportstathist Views statistics of one statistics type on a specified port.
dspqbinstats Views all Qbin summary statistics on a specified trunk or port.
dsptrkstathist Views interval statistics of one statistic type on a specific specified trunk.