Specifications

10-67
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Chapter 10 Cisco IGX 8400 Series IP Service
Managing IP Services
shutdown
half-duplex
!
interface ATM1/0
no ip address
no ip route-cache cef
no atm ilmi-keepalive
!
interface ATM2/0
no ip address
no ip mroute-cache
tag-control-protocol vsi base-vc 0 180 slaves 16
atm clock INTERNAL
no atm ilmi-keepalive
tag-switching ip
!
interface XTagATM103
ip unnumbered Loopback0
shutdown
extended-port ATM2/0 vsi 0x000A0300
tag-switching atm vpi 2-15
!
interface XTagATM104
ip unnumbered Loopback0
extended-port ATM2/0 vsi 0x000A0400
tag-switching atm vpi 2-15
tag-switching ip
!
interface XTagATM151
ip unnumbered Loopback0
extended-port ATM2/0 vsi 0x000F0100
tag-switching atm vpi 2-15
tag-switching ip
!
router ospf 100
log-adjacency-changes
network 13.0.0.0 0.255.255.255 area 100
!
no ip classless
no ip http server
!
line con 0
exec-timeout 0 0
transport input none
line aux 0
line vty 0 4
password lab
login
!
end
Managing IP Services
Managing Slave Resources
The maximum number of slaves in a 16-slot switch is 14 and in a 32-slot switch is 30. Therefore, a
maximum of 14 or 30 LCNs are necessary to connect a slave to all other slaves in the node. This set of
LCNs is allocated from the AutoRoute partition.