Specifications

10-42
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Chapter 10 Cisco IGX 8400 Series IP Service
IP Service Provisioning
MPLS Configuration on the IGX
The following sections provide a sample MPLS configuration using the network shown in Figure 10-16.
For information on configuring Cisco IOS software for MPLS, see MPLS Label Switch Controller and
Enhancements 12.2(8)T.
Figure 10-16 Simplified Example of Configuring an MPLS Network.
dspsct Displays SCTs assigned to an interface. The command has three levels of
operation:
dspsct
With no arguments lists all the service templates resident in the node.
dspsct tmplt_id
Lists all the Service Classes in the template.
dspsct tmplt_id Service_Class
Lists all the parameters of that service class.
dspvsiif Displays the service class template assigned to an interface.
dspvsipartinfo Displays VSI resource status for the trunk and partition.
Table 10-14 Switch Software Commands for Setting up a VSI (Virtual Switch Interface) (continued)
Mnemonic Description
Edge
LSR-A
(Cisco 7507)
35243
ATM
LSR-5
IGX
ATM
LSR-4
IGX
ATM Network
ATM
LSR-3
IGX
LSC 1
(Cisco 7204VXR)
ATM
3/0
xatm11
xatm22
142.6.133.22
3.2
3.1
4.1
ATM-LSR-1
IGX
(detailed)
Edge
LSR-C
(URM)
Edge
LSR-B
(Cisco 7507)
label i/f 4/0/0.9
142.6.133.142
ATM 4/0/0
204.135.30.33
ATM 0/0
204.133.42.3
label i/f 0/0.1
142.7.133.23
ATM 2/0/0
204.129.35.5
xatm22
142.7.133.22
LSC 2
(URM)
ATM
0/0
xatm11
4.1
3.1
6.2
ATM-LSR-2
IGX
(detailed)
xatm13
142.4.133.13
xatm13
142.4.133.15