Specifications

8-10
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Chapter 8 Cisco IGX 8400 Series ATM Service
Where To Go Next
Where To Go Next
For information about FR service on the IGX, refer to Chapter 9, “Cisco IGX 8400 Series Frame Relay
Service”
For installation and basic configuration information, see the Cisco IGX 8400 Series Installation Guide,
Chapter 1, “Cisco IGX 8400 Series Product Overview”
For more information on switch software commands, refer to the Cisco WAN Switching Command
Reference, Chapter 1, “Command Line Fundamentals.”
dspconcnf Displays connection configuration information for the
specified connection.
dspcons Displays all connections on the line.
dsplmistats Displays LMI statistics.
dspport Displays port information.
dspportq Displays the ARM port Qbin information for the
specified port.
dspports Displays all ports configured onto the node.
dspportstats Displays port statistics.
upport Activates (ups) the specified port.
Table 8-3 Switch Software Commands Related to ATM Connections (continued)
Command Description