Specifications

3-22
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Chapter 3 Cisco IGX 8400 Series Nodes
Switch Software Commands Related to IGX Nodes
Switch Software Commands Related to IGX Nodes
Full command descriptions for the switch software commands listed in Table 3-9 can be accessed at one
of the following links:
• For commands addad through cpytrkict, see Chapter 3, “Alphabetical List of Commands addad
through cpytrkict” in the Cisco WAN Switching Command Reference.
• For commands dchst through window, see Chapter 4, “Alphabetical List of Commands dchst
through window” in the Cisco WAN Switching Command Reference.
Table 3-9 Switch Software Commands Related to IGX Nodes
Command Description
addalmslot Adds an alarm slot.
addyred Adds Y-cable redundancy.
cnfdate Configures the node date.
cnffunc Configures system function.
cnfname Configures node name.
cnfprt Configures printing functions.
cnfterm Configures terminal port.
cnftime Configures node time.
cnftmzn Configures node time zone.
delalmslot Deletes alarm slot.
delyred Deletes Y-cable redundancy.
dspcd Displays card.
dspcds Displays cards.
dsplancnf Displays LAN configuration.
dsplmistats Displays LMI Statistics.
dspnds Displays nodes.
dspnode Displays summary information
about interface shelves.
dspprtcnf Displays print configuration.
dsppwr Displays power utilization on the
node.
dsptermcnf Displays terminal configuration.
dsptermfunc Displays terminal port
configuration.
dspyred Displays Y-cable redundancy.
prtyred Prints Y-cable redundancy.
upcd Activates (ups) the card.
window Opens a window to an external
device.