Specifications

ii
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Preface
Organization
Organization
This document is organized into the following chapters:
Tip Some links in this online document connect with other Cisco documentation resources, such as
Cisco IOS documentation, or the Cisco WAN Switching Software Command Reference. When you find
the information you are looking for, use the back button on your web browser to return to this document.
Table 1 Cisco IGX 8400 Series Provisioning Guide Organization
Chapter Number and Title Chapter Description
Chapter 1, “Introduction to the
Cisco IGX 8400 Series”
Provides general networking and functional information on the
Cisco IGX 8400 Series.
Chapter 2,
“Cisco IGX 8400 Series
Cards”
Provides information on IGX modules (front cards and back
cards).
Chapter 3, “Cisco IGX 8400
Series Nodes”
Provides information on IGX node setup and management.
Chapter 4, “Cisco IGX 8400
Series Trunks”
Provides information on IGX trunk setup and management.
Chapter 5, “Cisco IGX 8400
Series Lines”
Provides information on IGX line setup and management.
Chapter 6, “Cisco IGX 8400
Series Data Service”
Provides configuration and troubleshooting information specific
to IGX data services.
Chapter 7, “Cisco IGX 8400
Series Voice Service”
Provides configuration and troubleshooting information specific
to IGX voice services.
Chapter 8, “Cisco IGX 8400
Series ATM Service”
Provides configuration and troubleshooting information specific
to IGX ATM services.
Chapter 9, “Cisco IGX 8400
Series Frame Relay Service”
Provides configuration and troubleshooting information specific
to IGX Frame Relay services.
Chapter 10, “Cisco IGX 8400
Series IP Service”
Provides configuration and troubleshooting information specific
to IGX-URM MPLS services.
Appendix A, “Cisco IGX 8400
Series Feeder Nodes”
Provides information on using the IGX as a feeder node.