Specifications

2-102
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Chapter 2 Cisco IGX 8400 Series Cards
Universal Router Module
Task 3: Terminating the URM Cisco IOS CLI Window Session
To terminate the window session from the URM Cisco IOS CLI, enter the configured window escape
string in any Cisco IOS configuration mode.
For information on configuring the window escape string, see Step 2 in the “Task 1: Configuring the
URM Cisco IOS CLI Window Feature” section on page 2-101.
WAN Switch Software for the URM
You can use standard and superuser commands on the switch software CLI to create voice connections
on the URM (see Table 2-60).
Note The Cisco IOS image stored in boot Flash is managed by switch software; see the “Managing the Boot
Flash Cisco IOS Image” section on page 2-109 for more information.
Card management, port management, and connection management commands for the embedded UXM-E
side of the URM are unchanged.
For details on command syntax and parameters, see Cisco WAN Switching Command Reference and
Cisco WAN Switching SuperUser Command Reference. Note that the superuser commands are rarely
used and many of them are only for debug purposes. In Table 2-60, use the See column to access full
command descriptions as they appear in the Cisco WAN Switching Command Reference.
Note Because there is no physical line connecting the embedded UXM-E to the embedded Cisco IOS router,
switch software line connections and commands are not supported on the URM.
Table 2-60 Switch Software Commands for the URM
Command Description
addport slot.1 Creates the internal ATM port, which activates the
embedded router.
cnfrtr slot ios-cnfg [serial-pt-cnfg] Configures the router Cisco IOS configuration source on
the selected slot and sets the serial port function.
cnfrtrcnfmastip Configures the TFTP server IP address used by the router
during RRC.
cnfrtrparm slot parm-index parm-value Configures the router service-level configuration on the
selected slot.
dsprtr slot Displays router configuration information on the
selected slot.
dsprtrslot slot Displays router operational information on the selected
slot.
dsprtrslots Displays and refreshes router information for all slots in
a Cisco IGX 8400 series switch.
rstrtr slot Resets the embedded router without requiring a reset or
restart on the selected slot.