Specifications

2-91
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Chapter 2 Cisco IGX 8400 Series Cards
Universal Router Module
BC-URI-2FE Back Card
The BC-URI-2FE back card supports data traffic for the URM front card. The BC-URI-2FE supports the
following features:
• Onboard MC68LC302 processor with 128 kb of local SRAM
• Onboard RJ-45 connectors with transition cable breakout to physical layer
Note The BC-URI-2FE does not support voice traffic. For voice features, use either the BC-URI-2FE2VT1 or
the BC-URI-2FE2VE1.
For a description of the BC-URI-2FE back card, see Figure 2-44. For information on the back card
LEDs, see Table 2-59.
Table 2-56 BC-URI-2FE2V T1 and BC-URI-2FE2VE1 Connections
Connector Function
Console port A standard RJ-45 port that supports EIA/TIA-232 communication to a
Cisco IOS CLI.
10/100 Fast Ethernet
ports (FE0 and FE1)
Standard RJ-45 UTP interfaces that support 10 Mbps, or 100 Mbps full or
half duplex.
T1/E1 interfaces The T1/E1 interfaces are provided on the VWIC-2MFT daughter card which
is inserted into the BC-URI-2FE2VT1 or BC-URI-2FE2VE1 back card.
Table 2-57 LEDs for the BC-URI-2FE2VT1 and BC-URI-2FE2VE1
LED Color Meaning
EN Green The back card is powered on. After Cisco IOS software is up, this LED
indicates if the voice subsystem is up or not. It will not light up if the
VWIC is not installed in the back card.
100 Mbps Green The link speed is 100 Mbps.
LINK Green The link is up.
DPLX Green The link is in full-duplex mode.
Table 2-58 LEDs for the VWIC-2MFT-T1 or VWIC-2MFT-E1
LED Color Meaning
LP Yellow A loopback is configured.
CD Green A carrier is detected.
AL Yellow An alarm condition exists.