Specifications

2-86
Cisco IGX 8400 Series Provisioning Guide, Release 9.3.3 and Later Releases
OL-1166-04
Chapter 2 Cisco IGX 8400 Series Cards
Universal Router Module
Figure 2-41 URM Hardware Configuration
Table 2-54 URM Hardware Components and Related Software
Card Component Required Software
NPM NPM installed in the
Cisco IGX chassis
Switch Software Release 9.3.20 or later
Note Switch Software Release 9.3.30 or later is
required for BC-URI-2FE back card support.
Tip Use the switch software dspcds command to
determine the switch software release
currently running on the IGX.
URM front card Embedded UXM-E URM Administration Firmware Version XAA or later
Note Administration Firmware Version XBA is
required for BC-URI-2FE back card support.
URM front card Embedded
Cisco router
Cisco IOS Release 12.1(5)YA or later
Note Cisco IOS Release 12.2(2)XB or later is
required for BC-URI-2FE back card support.
BC-URI-2FE2VT1
back card
VWIC-2MFT-T1
(factory-installed)
–
Voice
interface
connections
CON
37358
URI-2FE2V
(T1 or E1)URM
Fast
Ethernet
connections