Specifications

CHAPTER
A-1
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
A
Supported MIBs
This appendix lists the supported management information bases (MIBs) for this release on the Cisco
Industrial Ethernet 2000U Series (IE 2000U) and Connected Grid Switches, hereafter referred to as
switch. This appendix includes the following sections:
• MIB List, page A-1
• Using FTP to Access the MIB Files, page A-3
MIB List
• BRIDGE-MIB (RFC1493)
Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages
using the configured community string always provide information for VLAN 1. To obtain
the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community
string in the SNMP message: configured community string @x.
• CISCO-AUTH-FRAMEWORK-MIB
• CISCO-CABLE-DIAG-MIB
• CISCO-CDP-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-DHCP-SNOOPING-MIB
• CISCO-ENTITY-ALARM-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-SENSOR MIB
• CISCO-ENTITY-VENDORTYPE-OID-MIB
• CISCO-ENVMON-MIB
• CISCO-EPM-NOTIFICATION-MIB
• CISCO-ERR-DISABLE-MIB
• CISCO-ETHER-CFM-MIB
• CISCO-ETHERNET-ACCESS-MIB