Specifications

18-8
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 18 Configuring Online Diagnostics
Running Online Diagnostic Tests
Displaying Online Diagnostic Tests and Results
EXAMPLE
This is an example of the output from the show diagnostic result command:
Switch# show diagnostic result
: SerialNo : FOC1225U4CY
Overall diagnostic result: PASS
Test results: (. = Pass, F = Fail, U = Untested)
1) TestPortAsicStackPortLoopback ---> .
2) TestPortAsicLoopback ------------> U
3) TestPortAsicCam -----------------> U
4) TestPortAsicRingLoopback --------> U
5) TestMicRingLoopback -------------> U
6) TestPortAsicMem -----------------> U
This is an example of the output from the show diagnostic post command:
Switch# show diagnostic post
Stored system POST messages:
Switch
---------
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: Thermal Tests : Begin
POST: Thermal Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
Command Purpose
show diagnostic content Displays the online diagnostics configured for a
switch.
show diagnostic status Displays the running diagnostic tests.
show diagnostic result [detail | test {name |
test-id | test-id-range | all [detail]}]
Displays the specified online diagnostics test
results.
show diagnostic switch [detail] Displays the online diagnostics test results.
show diagnostic schedule Displays the online diagnostics test schedule.
show diagnostic post Displays the POST results. (The output is the
same as the show post command output.)