Specifications

17-46
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 17 Configuring Ethernet OAM, CFM, and E-LMI
Displaying Ethernet OAM Protocol Information
Use the no form of each command to remove the option from the template. Use the no source-template
template-name to remove the source template association.
EXAMPLE
Switch(config)# template oam-temp
Switch(config-template)# ethernet oam link-monitor receive-crc window 99
Switch(config-template)# ethernet oam link-monitor symbol-period threshold high 299
Switch(config-template)# ethernet oam link-monitor frame window 399
Switch(config-template)# ethernet oam link-monitor frame-period threshold high 599
Switch(config-template)# ethernet oam link-monitor frame-seconds window 699
Switch(config-template)# ethernet oam link-monitor high
threshold action
error-disable-interface
Switch(config-template)# exit
Switch(config)# interface gigabitEthernet 3/8
Switch(config-if)# source template oam-temp
Switch(config-if)# exit
Switch(config)# exit
Displaying Ethernet OAM Protocol Information
You can use the privileged EXEC commands in the following table to display Ethernet OAM protocol
information.
Step 8
ethernet oam link-monitor high threshold
action error-disable-interface
(Optional) Configure the switch to put an interface in
an error disabled state when a high threshold for an
error is exceeded.
Step 9
exit Return to global configuration mode.
Step 10
interface interface-id Define an Ethernet OAM interface, and enter
interface configuration mode.
Step 11
source-template template-name Associate the template to apply the configured
options to the interface.
Step 12
end Return to privileged EXEC mode.
Step 13
show ethernet oam status [interface
interface-id]
Verify the configuration.
Step 14
copy running-config startup-config (Optional) Save your entries in the configuration
file.
Command Purpose
Command Purpose
show ethernet oam discovery [interface
interface-id]
Displays discovery information for all Ethernet OAM
interfaces or the specified interface.
show ethernet oam statistics [interface
interface-id]
Displays detailed information about Ethernet OAM
packets.
show ethernet oam status [interface
interface-id]
Displays Ethernet OAM configuration for all interfaces
or the specified interface.
show ethernet oam summary Displays active Ethernet OAM sessions on the switch.