Specifications

14-16
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 14 Configuring SNMP
Configuring SNMP
DETAILED STEPS
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
snmp-server engineID remote
ip-address engineid-string
Specify the engine ID for the remote host.
Step 3
snmp-server user username
groupname {remote host
[udp-port port]} {v1 [access
access-list] | v2c [access
access-list] | v3 [encrypted]
[access access-list] [auth {md5 |
sha} auth-password]}
Configure an SNMP user to be associated with the remote host
created in Step 2.
Note You cannot configure a remote user for an address
without first configuring the engine ID for the remote
host. Otherwise, you receive an error message, and the
command is not executed.
Step 4
snmp-server group groupname
{v1 | v2c | v3 {auth | noauth |
priv}} [read readview] [write
writeview] [notify notifyview]
[access access-list]
Configure an SNMP group.
Step 5
snmp-server host host-addr
[informs | traps] [version {1 | 2c |
3 {auth | noauth | priv}}]
community-string
[notification-type]
Specify the recipient of an SNMP trap operation.
• For host-addr, specify the name or Internet address of the
host (the targeted recipient).
• (Optional) Enter informs to send SNMP informs to the host.
• (Optional) Enter traps (the default) to send SNMP traps to
the host.
• (Optional) Specify the SNMP version (1, 2c, or 3). SNMPv1
does not support informs.
• (Optional) For Version 3, select authentication level auth,
noauth, or priv.
Note The priv keyword is available only when the
cryptographic software image is installed.
• For community-string, when version 1 or version 2c is
specified, enter the password-like community string sent
with the notification operation. When version 3 is specified,
enter the SNMPv3 username.
Note The @ symbol is used for delimiting the context
information. Avoid using the @ symbol as part of the
SNMP community string when configuring this
command.
• (Optional) For notification-type, use the keywords listed in
Table 14-4 on page 14-14. If no type is specified, all
notifications are sent.