Specifications

14-12
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 14 Configuring SNMP
Configuring SNMP
Step 3
snmp-server group groupname {v1 |
v2c | v3 {auth | noauth | priv}} [read
readview] [write writeview] [notify
notifyview] [access access-list]
Configure a new SNMP group on the remote device.
• For groupname, specify the name of the group.
• Specify a security model:
– v1 is the least secure of the possible security models.
– v2c is the second least secure model. It allows
transmission of informs and integers twice the normal
width.
– v3, the most secure, requires you to select an
authentication level:
auth—Enables the Message Digest 5 (MD5) and the
Secure Hash Algorithm (SHA) packet authentication.
noauth—Enables the noAuthNoPriv security level.
This is the default if no keyword is specified.
priv—Enables Data Encryption Standard (DES)
packet encryption (also called privacy).
Note The priv keyword is available only when the
cryptographic software image is installed.
• (Optional) Enter read readview with a string (not to
exceed 64 characters) that is the name of the view in
which you can only view the contents of the agent.
• (Optional) Enter write writeview with a string (not to
exceed 64 characters) that is the name of the view in
which you enter data and configure the contents of the
agent.
• (Optional) Enter notify notifyview with a string (not to
exceed 64 characters) that is the name of the view in
which you specify a notify, inform, or trap.
• (Optional) Enter access access-list with a string (not to
exceed 64 characters) that is the name of the access list.
Command Purpose