Specifications

10-7
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 10 Configuring CDP
Related Documents
Switch(config)# cdp run
Switch(config)# end
This example shows how to enable CDP on a port when it has been disabled:
Switch# configure terminal
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# cdp enable
Switch(config-if)# end
This example shows how to change a UNI to an ENI and enable CDP on the port:
Switch# configure terminal
Switch(config)# interface fastethernet0/1
Switch(config-if)# port-type eni
Switch(config-if)# cdp enable
Switch(config-if)# end
Related Documents
• Cisco IOS Master Command List, All Releases
• Cisco IOS Cisco Discovery Protocol Command Reference
• Cisco Discovery Protocol Configuration Guide, Cisco IOS Release 15M&T
Feature History
Platform First Supported Release
IE 2000U Cisco IOS Release 15.0(2)EH
CGS 2520 Cisco IOS Release 12.2(53)EX
Ethernet Switch Module (ESM) for CGR 2010 Cisco IOS Release 12.2(53)EX