Specifications

9-8

System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches

Chapter 9 Configuring Port-Based Traffic Control

Configuring Storm Control

You configure storm control on a port and enter the threshold level that you want to be used for a

particular type of traffic.

BEFORE YOU BEGIN

Review the “Guidelines and Limitations” section on page 9-5.

DETAILED STEPS

Command Purpose

Step 1

configure terminal Enter global configuration mode.

Step 2

interface interface-id Specify the interface to configure, and enter interface

configuration mode.

Step 3

no shutdown Enable the port, if necessary. By default, user network interfaces

(UNIs) and enhanced network interfaces (ENIs) are disabled, and

network node interfaces (NNIs) are enabled.