Specifications

9-7
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 9 Configuring Port-Based Traffic Control
Default Settings
Default Settings
Table 9-2 Port Security Compatibility with Other Switch Features
Type of Port or Feature on Port
Compatible with
Port Security
Trunk port Yes
Dynamic-access port (a VLAN Query Protocol [VQP] port configured with the
switchport access vlan dynamic interface configuration command)
No
Routed port No
SPAN source port Yes
SPAN destination port No
EtherChannel No
Tunneling port Yes
Protected port Yes
802.1x port Yes
Private VLAN port No
IP source guard Yes
Dynamic Address Resolution Protocol (ARP) inspection Yes
Flex Links Yes
Feature Default Setting
Storm control Unicast, broadcast, and multicast storm control
are disabled on the switch interfaces; that is, the
suppression level is 100 percent.
Protected ports No protected ports are defined.
Port blocking Flooding of unknown multicast and unicast traffic
out of a port is not blocked; these packets are
flooded to all ports.
Port Security Settings
Port security Disabled on a port.
Sticky address learning Disabled.
Maximum number of secure MAC addresses per
port
1.
Violation mode Shutdown. The port shuts down when the
maximum number of secure MAC addresses is
exceeded.
Port security aging Disabled. Aging time is 0.
Static aging is disabled.
Type is absolute.