Specifications

CHAPTER

9-1

System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches

Configuring Port-Based Traffic Control

This chapter describes how to configure the port-based traffic control features on the Cisco Industrial

Ethernet 2000U Series (IE 2000U) and Connected Grid Switches, hereafter referred to as switch.

Note For complete syntax and usage information for the commands used in this chapter, see the documents

listed in the “Related Documents” section on page 9-21.

• Information About Port-Based Traffic Control, page 9-1

• Prerequisites, page 9-5

• Guidelines and Limitations, page 9-5

• Default Settings, page 9-7

• Configuring Storm Control, page 9-8

• Configuring Protected Ports, page 9-10

• Configuring Port Blocking, page 9-11

• Configuring Port Security, page 9-12

• Verifying Configuration, page 9-19

• Configuration Example, page 9-19

• Related Documents, page 9-21

• Feature History, page 9-21

Information About Port-Based Traffic Control

Port-based traffic control includes the following features:

• Storm Control, page 9-2

• Protected Ports, page 9-3

• Port Blocking, page 9-3

• Port Security, page 9-3