Specifications

7-7
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 7 Configuring Smartports Macros
Verifying Configuration
Applying command... 'switchport port-security maximum 1'
Applying command... 'switchport port-security aging time 2'
Applying command... 'switchport port-security violation restrict'
Applying command... 'switchport port-security aging type inactivity'
Applying command... 'port-type nni'
Applying command... 'spanning-tree portfast'
Verifying Configuration
Configuration Example
This example shows how to create a macro that defines the switchport access VLAN and the number of
secure MAC addresses and also includes two help string keywords by using # macro keywords:
Switch(config)# macro name test
switchport access vlan $VLANID
switchport port-security maximum $MAX
#macro keywords $VLANID $MAX
@
This example shows how to display the cisco-desktop macro and how to set the access VLAN ID to 25
on an interface:
Switch# show parser macro name cisco-desktop
Macro name : cisco-desktop
Macro type : default interface
# Macro keywords $access_vlan
# macro description cisco-desktop
switchport access vlan $access_vlan
switchport port-security
switchport port-security maximum 1
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
port-type nni
spanning-tree portfast
spanning-tree bpduguard enable
Switch# configure terminal
Switch(config-if)# interface fastethernet 0/2
Switch(config-if)# macro trace cisco-desktop $access_vlan 25
Applying command... 'macro description cisco-desktop'
Applying command... 'switchport access vlan 25'
Applying command... 'switchport port-security'
Applying command... 'switchport port-security maximum 1'
Applying command... 'switchport port-security aging time 2'
Applying command... 'switchport port-security violation restrict'
Command Purpose
show parser macro Displays all Smartports macros.
show parser macro name macro-name Displays a specific Smartports macro.
show parser macro brief Displays the Smartports macro names.
show parser macro description [interface
interface-id]
Displays the Smartports macro description for all
interfaces or for a specified interface.