Specifications

7-3
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 7 Configuring Smartports Macros
Configuring Smartports Macros
Configuring Smartports Macros
This section includes the following topics:
• Creating Smartports Macros, page 7-4
• Applying Smartports Macros, page 7-5
Table 7-1 Default Smartports Macros
Macro Name
1
1. Cisco-default Smartports macros vary, depending on the software version running on your switch.
Description
Global Configuration Macros
cisco-cg-global Use this global configuration macro to configure the switch settings for the industrial Ethernet
environment. This macro is automatically applied when you use Express Setup to initially
configure the switch.
Note You must first apply the cisco-cg-global macro for the interface configuration macros to
work properly.
cisco-cg-password Use this global configuration macro to configure the password settings for the switch.
no-cisco-cg-password Use the no form of this global configuration macro to delete the macro from the switch.
cisco-sniffer Use this global configuration macro to configure SPAN functionality to analyze traffic on another
port of the switch.
no-cisco-sniffer Use the no form of this global configuration macro to delete the macro from the interface.
Interface Configuration Macros
cisco-cg-hmi Use this interface configuration macro for increased network security and reliability when
connecting a desktop device, such as a PC, to a switch port. This macro is optimized for utility
deployments.
no-cisco-cg-hmi Use the no form of this interface configuration macro to delete the macro from the switch.
cisco-cg-ied Use this interface configuration macro when connecting the switch to an IED.
no-cisco-cg-ied Use the no form of this interface configuration macro to delete the macro from the switch.
cisco-cg-router Use this interface configuration macro when connecting the switch and a WAN router. This
macro is optimized for utility deployments.
no-cisco-cg-router Use the no form of this interface configuration macro to delete the macro from the switch.
cisco-cg-switch Use this interface configuration macro when connecting a ring of switches. This macro is
optimized for utility deployments.
no-cisco-cg-switch Use the no form of this interface configuration macro to delete the macro from the switch.
cisco-cg-wireless Use this interface configuration macro when connecting the switch and a wireless access point.
This macro is optimized for utility deployments.
no-cisco-cg-wireless Use the no form of this interface configuration macro to delete the macro from the switch.
cisco-desktop Use this interface configuration macro for increased network security and reliability when
connecting a desktop device, such as a PC, to a switch port. This macro is optimized for utility
deployments.
no-cisco-desktop Use the no form of this interface configuration macro to delete the macro from the interface.