Specifications

6-7

System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches

Chapter 6 Configuring SDM Templates

Configuration Example

number of directly-connected IPv6 addresses: 1.5K

number of indirect IPv6 unicast routes: 1.25K

number of IPv4 policy based routing aces: 0.25K

number of IPv4/MAC qos aces: 0.75K

number of IPv4/MAC security aces: 0.5K

number of IPv6 policy based routing aces: 0.25K

number of IPv6 qos aces: 0.5K

number of IPv6 security aces: 0.5K

Configuration Example

This is an example of an output display when you have changed the template to the layer-2 template and

have not reloaded the switch:

Switch# show sdm prefer

The current template is "default" template.

The selected template optimizes the resources in

the switch to support this level of features for

8 routed interfaces and 1024 VLANs.

number of unicast mac addresses: 5K

number of IPv4 IGMP groups + multicast routes: 1K

number of IPv4 unicast routes: 9K

number of directly-connected IPv4 hosts: 5K

number of indirect IPv4 routes: 4K

number of IPv4 policy based routing aces: 0.5K

number of IPv4/MAC qos aces: 0.5K

number of IPv4/MAC security aces: 1K

On next reload, template will be "layer-2" template.

This example shows how to configure a switch with the layer-2 template:

Switch(config)# sdm prefer layer-2

Switch(config)# end

Switch# reload

Proceed with reload? [confirm]