Datasheet

9E0 - 100
Leading the way in IT testing and certification tools, www.testking.com
- 8 -
Cisco Secure Intrusion Detection System 4 chap 5 page 33
QUESTION NO: 10
Which Cisco IDS communication infrastructure parameters are required to enable the
use of IDS Device Manager to configure the Sensor? (Choose two)
A. Sensor organization name
B. Sensor group name
C. IDM group name
D. Sensor organization ID
E. IDM organization ID
Answer: A, D
Explanation:
Communication infrastructure parameters:
 Sensor Host ID and Organization ID
 Sensor Host Name and Organization Name
 Sensor IP Address
 Cisco Secure IDS Director or Cisco Secure PM IDS Manager Host ID and
Organization ID
 Cisco Secure IDS Director or Cisco Secure PM IDS Manager Host Name and
Organization Name
 Cisco Secure IDS Director or Cisco Secure PM IDS Manager workstation IP
address
Reference: Cisco Secure Intrusion Detection System Sensor Configuration Note Version 2.5
QUESTION NO: 11
A company has purchased a Cisco IDS solution that includes IDS modules.
The switch group had decided not to provide the security department interactive access
to the switch. What IDSM feature should be configured to provide the security
department access to the IDSM command line?
A. AAA
B. TFTP
C. HTTP
D. Telnet
E. HTTPS
Answer: D
Explanation:
The Catalyst 6000 family switch can be accessed either through a console management
session or through telnet. Some switches might even support ssh access. After an interactive
session is established with the switch, you must session into the ISDM line card. This is the
only way to gain command-line access to the ISDM.