Datasheet

9E0 - 100
Leading the way in IT testing and certification tools, www.testking.com
- 26 -
A. show con –all
B. show config
C. show conduit
D. conduit /all
Answer: C
Explanation:
To look at the configured conduits, use the show conduit command.
Reference: Cisco Secure PIX Firewall (Ciscopress) page 89
QUESTION NO: 47
In PIX Terminology, what exactly is a Conduit?
A. It routes data from one interface to another.
B. The Conduit is where the data travels on the Bus.
C. It controls what QoS the packets get when going through Eth1.
D. Controls connections between external and internal networks.
Answer: D
Explanation:
the conduit command functions by creating an exception to the PIX Firewall Adaptive
Security Algorithm that then permits connections from one PIX Firewall network interface to
access hosts on another.
Reference: Cisco PIX Firewall Command Reference, Version 6.3
QUESTION NO: 48
Which value can be assigned to define the Cisco IDS 4210 Sensor’s sensing interface?
A. Auto
B. Detect
C. Probe
D. Sniffing
E. Select
Answer: D
Explanation:
An individual sensor contains two separate interfaces. The sensor used on of the interfaces to
passively sniff all the network packets by placing the interface in Promiscuous mode. The
sensor uses the other network interface for command and control traffic.
Reference:
Cisco Secure Intrusion Detection System (Ciscopress) page 98
QUESTION NO: 49