Datasheet

9E0 - 100
Leading the way in IT testing and certification tools, www.testking.com
- 21 -
D. show translate
Answer: A
Explanation:
The xlate command allows you to show or clear the contents of the translation (xlate) slots.
show xlate, clear xlate
Reference: Cisco Secure PIX Firewall (Ciscopress) page 77
QUESTION NO: 35
When working on your PIX, you would like to view the network states of local hosts.
What command could you use?
A. local host all
B. show local-host
C. show host all
D. show local remote
E. show set local
Answer: B
Explanation:
The show local-host command assists you in characterizing your “normal” load on a
statically translated host, both before and after setting limits.
Reference: Cisco Secure PIX Firewall (Ciscopress) page 171
QUESTION NO: 36
If you wanted to enable access to a higher security level interface from a lower level
interface what could you do?
A. Set the conduit to 0/1.
B. Use the static and access-list commands.
C. Set the Eth1/0 interface to auto.
D. Use the nat and global commands.
Answer: B
Explanation:
Two things are required for traffic to flow from a lower security to a higher security interface:
a static translation and a conduit or an access list to permit the desired traffic.
Reference: Cisco Secure PIX Firewall (Ciscopress) page 55
QUESTION NO: 37
A company has a requirement to create a custom signature that detects BGP packets
traversing the network.
Which Cisco IDS signature micro-engine can be used to create this signature?