User guide
90
Release Notes for Cisco IOS Release 12.4T
OL-8012-09 Rev. B0
Platform-Specific Information
Cisco IOS Support
Note • CMM has its own software image; the image is not bundled with the supervisor engine or MSFC
images. See the “Additional Notes for the Cisco Catalyst 6500/Cisco 7600 Communication Media
Module” section on page 91 for instructions on downloading the image to the CMM flash memory.
• Supervisor Engine 720 requires the CMM to run Cisco IOS Release 12.3(8)XY4 or a later release.
• Supervisor Engine 720-3B/3BXL requires the CMM to run Cisco IOS Release 12.3(8)XY4 or a later
release.
The software requirements for CMM to support Voice Features for Cisco IOS Release 12.3(14)T are as
follows:
• Catalyst Release 7.6(12) is the minimum Catalyst Supervisor Engine software release.,
Cisco recommends Release 8.2(1) or a later release.
• Cisco IOS Release 12.1(19)E is the minimum release, Cisco IOS Release 12.1(20)E is
recommended.
• Online diagnostic features require the following:
–
For Cisco Catalyst 6500/Cisco 7600 Supervisor Engine running Catalyst OS, Catalyst Release
8.1 or a later release is required.
–
For Cisco Catalyst 6500/Cisco 7600 Supervisor Engine running Cisco IOS, Cisco IOS
Release 12.2(18) or a later release is required.
The software requirements for CMM to support all other features are as follows:
• Cisco Catalyst software release:
–
Supervisor Engine 1 and Supervisor Engine 2—Refer to the Memory Recommendations and
Requirements section in the Catalyst 6500 Series Supervisor Engine 1A DRAM Upgrade
Installation Note for Supervisor Engine 1 and to the Memory Recommendations and
Requirements section in the for Supervisor Engine 2 for the minimum and recommended
memory requirements.
–
Supervisor Engine 720—Refer to the Supervisor Engine documentation for the minimum and
recommended memory requirements.
• •Cisco IOS Release:
–
Supervisor Engine 1 and Supervisor Engine 2— Minimum release is Cisco IOS
Release 12.1(19)E, and the recommended release is Cisco IOS Release 12.1(20)E.
–
Supervisor Engine 720—Minimum software is the Cisco IOS Release 12.2(14)SX, and the
recommended release is Cisco IOS Release 12.2(17)SX.
Note If your system is running Cisco IOS software on both the supervisor engine and the MSFC, the
following images are available: sup11, sup12, sup22, and s720.
• SNMP is supported with Cisco IOS Release 12.4.
Cisco CallManager Support
Cisco IOS Release 12.4 supports Cisco CallManager Release 3.2(2) and later releases.