User guide

48
Release Notes for Cisco IOS Release 12.4T
OL-8012-09 Rev. B0
Platform-Specific Information
1-port ADSL over POTS with dying gasp (WIC-1ADSL-DG) Cisco 2610XM, Cisco 2611XM,
Cisco 2620XM, Cisco 2621XM,
Cisco 2650XM, Cisco 2651XM
Cisco 2691
1-port G.SHDSL WIC (WIC-1SHDSL) Cisco 2610XM, Cisco 2611XM,
Cisco 2620XM, Cisco 2621XM,
Cisco 2650XM, Cisco 2651XM
Cisco 2691
1-port G.SHDSL with 4-wire support WIC
(WIC-1SHDSL-V2)
Cisco 2610XM, Cisco 2611XM,
Cisco 2620XM, Cisco 2621XM,
Cisco 2650XM, Cisco 2651XM
Cisco 2691
1-port ISDN BRI S/T interface (requires external NT-1)
(WIC-1B-S/T, WIC-1B-S/T-V3)
All Cisco 2600 series platforms
1-port ISDN BRI (NT-1) U (WIC-1B-U, WIC-1B-U-V2) All Cisco 2600 series platforms
1-port 56/64-kbps DSU/CSU All Cisco 2600 series platforms
1-port T1/fractional T1 with DSU/CSU WIC
(WIC-1DSU-T1, WIC-1DSU-T1-V2)
All Cisco 2600 series platforms
1-port high-speed serial (up to 2.048 Mbps) (WIC-1T) All Cisco 2600 series platforms
2-port dual high-speed serial (up to 8 Mbps;
asynchronous/synchronous support) (WIC-2T)
All Cisco 2600 series platforms
2-port asynchronous/synchronous (up to 128 kbps)
(WIC-2A/S)
All Cisco 2600 series platforms
Advanced Integration
Module
Data compression AIM (up to 8.192 Mbps) (AIM-COMPR2
and AIM-COMPR2-V2)
Cisco 2610XM, Cisco 2611XM,
Cisco 2620XM, Cisco 2621XM,
Cisco 2650XM, Cisco 2651XM
Data compression AIM (up to 16.384 Mbps)
(AIM-COMPR4)
Cisco 2691
DES/3DES/AES VPN encryption and compression module
(AIM-VPN/BPii-PLUS)
Cisco 2610XM, Cisco 2611XM,
Cisco 2620XM, Cisco 2621XM,
Cisco 2650XM, Cisco 2651XM
Enhanced Performance Hardware encryption AIM
(AIM-VPN/EP, AIM-VPN/EPII, AIM-VPN/EPII-PLUS)
Cisco 2691
Hardware encryption AIM (AIM-VPN/BP, AIM-VPN/BPII,
AIM-VPN/BPII-PLUS)
Cisco 2610XM, Cisco 2611XM,
Cisco 2620XM, Cisco 2621XM,
Cisco 2650XM, Cisco 2651XM
Content Engine Network
Modules
NM-CE-BP-40G-K9, Content Engine NM-Basic Perf-40GB All Cisco 2600 series platforms
NM-CE-BP-80G-K9, Content Engine NM-Basic Perf-80GB All Cisco 2600 series platforms
NM-CE-BP-SCSI-K9, Content Engine NM-Basic Perf-SCSI All Cisco 2600 series platforms
1. The voice/fax and ATM network modules require Cisco IOS Plus feature sets.
2. See T1/E1 multiflex voice/WAN interface cards in this table.
3. T1 and E1 multiflex voice/WAN interface cards can be used in a chassis slot or installed in a high-density voice network module.
Table 2 Supported Interfaces for the Cisco 2600 Series Routers (Continued)
Interface, Network
Module, or Data Rate
1
Product Description Supported Platforms