Installation guide

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards
Additional References
81
Cisco IOS Release 12.3(8)T4
OL-6454-01
Ethernet Ports on IP Phones with Multiple Ports Example
The following example illustrates the configuration for the IP phone:
interface FastEthernet0/x/x
switchport voice vlan x
switchport mode trunk
The following example illustrates the configuration for the PC:
interface FastEthernet0/x/y
switchport mode access
switchport access vlan y
Note Using a separate subnet, and possibly a separate IP address space, may not be an option for
some small branch offices due to the IP routing configuration. If the IP routing can handle
an additional subnet at the remote branch, you can use Cisco Network Registrar and
secondary addressing.
Additional References
The following sections provide references related to EtherSwitch HWICs.
Related Documents
Standards
Related Topic Document Title
Hardware Installation of Interface Cards Cisco Interface Cards Installation Guide
Information about configuring Voice over IP features Cisco IOS Voice, Video, and Fax Configuration Guide
Voice over IP commands Cisco IOS Voice, Video, and Fax Command Reference, Release
12.3 T
Standards Title
No new or modified standards are supported by this
feature, and support for existing standards have not
been modified by this feature.
—