Datasheet

3-10
Cisco Interface Card Hardware Installation Guide
OL-1919-18
Chapter 3 Connecting Serial Interface Cards to a Network
Serial High Speed WICs (HWICs)
Figure 3-11 Quad Serial Cable
Cable for the 8-Port and 16-Port Asynchronous HWICs
The 8-port and 16-port asynchronous HWICs use an octal cable, consisting of a 68-pin connector on the
interface card end and eight RJ45 connectors on the system end. See Figure 3-12. This cable is available
in DTE format only.
Figure 3-12 Octal Serial Cable
127425
127422