Installation Guide
Data Carousel Rate Settings for an IP-Only Configuration
78-4021167-01 Rev D 87
Data Carousel Rate Settings for an IP-Only
Configuration
The following table lists the suggested source data carousel rate settings for an IP-
only configuration. Reference the Site DNCS BFS Administration window to review
the current settings, if necessary. Refer to Configuring the ISDS for Verizon STB
Operations User Guide (part number 4001522) for additional information.
Note: In the following table, TT refers to Transport Type.
Source
ID
Data Carousel TT
Data Rate
(bps)
Block Size
(Bytes)
Indication
Interval (ms)
Enabled
0 System Carousel OOB 500000 1300 200 x
1 Out-of-Band OOB 500000 1300 200 x
2 Inband IB 1000000 1300 N/A x
3 CAM OOB OOB 500000 1300 200 x
4 CAM IB IB 500000 1300 N/A x
5 IPG OOB OOB 500000 1300 N/A x
6 IPG1 IB IB 1000000 1300 N/A x
7 PPV OOB OOB 500000 1300 200 x
9 SAM OOB 500000 1300 N/A x
10 IPG2 IB IB 1000000 1300 N/A x
11 POD_Channels OOB 500000 1300 200 x
12 IPG3 IB IB 1000000 1300 N/A x
14 IPG4 IB IB 1000000 1300 N/A x
16 IPG5 IB IB 1000000 1300 N/A x
18 IPG6 IB IB 1000000 1300 N/A x
20 IPG7 IB IB 1000000 1300 N/A x
21 MMM OOB OOB 500000 1300 N/A x
22 PPV IB2 IB 1000000 1300 N/A x
181 VQE
500000 1300
x
199 bootloader
3000000 1304 200 x