Installation Guide

Add and Configure the RNCS
78-4021167-01 Rev D 39
Adding a New Cluster Entry for the RNCS
Follow these instructions to add a new cluster entry for the RNCS.
Note: Skip this procedure if your site does not use clusters.
1 From the ISDS Administrative Console, select the Network Element
Provisioning tab.
2 Click Cluster. The ISDS Cluster Parameters window opens.
3 Click New.
4 Configure the new cluster with the following information:
 Name — the name you will use to identify this cluster
 Source IP — The IP address of the ISDS (dncsatm) associated with this
cluster
 SRM Host Name — The name or IP address of the Session Resource
Manager
 Group Destination Address — The Multicast IP address associated with the
cluster
 Hub Association — The hub associated with the cluster
5 Click Save.
Adding a New Localization Code
Complete these instructions to add a new localization code.
Note: Skip this procedure if your site does not use localization codes.