Installation Guide
Install the RNCS Software
78-4021167-01 Rev D 17
13 Type the appropriate netmask (for example, 255.255.255.0) and then press the Esc
and 2 keys simultaneously.
Note: If your site uses the Netra T5220 server, specify the netmask of the
e1000g0 interface.
Result: The window updates to prompt you to specify whether you want to
enable the IPv6 Internet protocol on the interface.
14 Select No and then press the Esc and 2 keys simultaneously.
Result: The window updates and prompts you to set the default route for the
interface.