Release Notes

DNCS and Application Server Hardware Platforms
4038417 Rev A 7
DNCS and Application Server Hardware Platforms
Introduction
This section describes the hardware configurations that are supported by SR
2.8.2/3.8.2/4.3.2.
Running the Doctor Report
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dncs/Utilities/doctor and then press Enter. The
/dvs/dncs/Utilities/doctor directory becomes the working directory.
3 Type doctor and then press Enter. The system generates a list of parameters
that you can use to run the Doctor Report. Each parameter causes the Doctor
Report to generate output with specific configuration information.
4 Type doctor -g and press Enter to view the version of DNCS software installed
and the DNCS and Application Server platform, CPU, and disk information.